7A: Finely divided 35-micron particles. 460-g/L bulk density. Up to 5,500 psi in tensile strength. Maximum granular PTFE chemical resistance. Parts fabricated from this resin have excellent physical and electrical properties.( 精細分割35微米的顆粒。 460 g / L的體積密度。高達5500 psi的拉伸強度。大顆粒聚四氟乙烯的耐化學性。這種樹脂制成的零件具有優異的物理和電氣性能)

7C: Finely divided "fluffy" 20-micron particles. 250-g/L bulk. Up to 5,900 psi in tensile strength. Often used in applications requiring excellent flex life. Parts fabricated from this resin have excellent physical and electrical properties.( 精細分割“蓬松“20微米的顆粒。 250 g / L的大部分。高達5,900 psi的拉伸強度。常用于要求具有出色的彈性生活中的應用。這種樹脂制成的零件具有優異的物理和電氣性能)

8A: Pelletized 510-micron particles. 690-g/L bulk density. Up to 4,480 psi in tensile strength. Resin particles are preformed using lower preform pressures. Parts fabricated from this resin have superior physical and electrical properties.( 球團510微米的顆粒。 690 g / L的體積密度。高達4,480 psi的拉伸強度。樹脂顆粒預制件預制使用較低的壓力。這種樹脂制成的零件具有優良的物理和電氣性能)

807-N: A multi-purpose PTFE resin which yields high productivity due to its high fill density. It has an excellent combination of handleability, processability, machinability and end-use properties.Note: Teflon? 807-N meets the requirements of ASTM D 4894-91a, type IV, grade 2 (except for tensile properties).( 多用途聚四氟乙烯樹脂產量高生產力，由于其高填充密度。它有一個可操作性，加工性能，可加工性和

終使用性能的結合。注：特富龍?807- N的符合美國ASTMe4894-91a，IV型的要求，2級（除拉伸性能）。)