99爱国产精品免费高清在线|无码精品啪啪一区二区99|国产日韩综合一区二区性色AV|CaoPorn免费视频国产

東莞市廣豐聯泰塑料有限公司

專供PC+ABS 沙伯基礎PC 德國拜耳PC+ABS 寶理PPS LCP

產品分類
聯系方式
友情鏈接
您當前的位置：首頁 » 新聞中心 » PBT Valox 745 SABIC Innovative Plastics
新聞中心
PBT Valox 745 SABIC Innovative Plastics
發布時間：2016-04-11        瀏覽次數：430        返回列表

VALOX ? Resin 745

SI | British | Metric | PDF Europe-Africa-Middle East: COMMERCIAL

 
VALOX 745 is 30% mineral filled PBT injection moulding resin with improved toughness and low warpage. Applications: telephone ringer frames, card racks.
 

Property
 
TYPICAL PROPERTIES (1)
MECHANICAL Value Unit Standard
Taber Abrasion, CS-17, 1 kg 26 mg/1000cy SABIC Method
Tensile Stress, break, 5 mm/min 50 MPa ISO 527
Tensile Strain, break, 5 mm/min 10 % ISO 527
Tensile Modulus, 1 mm/min 3700 MPa ISO 527
Flexural Stress, break, 2 mm/min 75 MPa ISO 178
Flexural Modulus, 2 mm/min 3400 MPa ISO 178
Hardness, H358/30 124 MPa ISO 2039-1
Hardness, Rockwell R 112 - ISO 2039-2
IMPACT Value Unit Standard
Izod Impact, unnotched 80*10*4 +23°C 50 kJ/m2 ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 50 kJ/m2 ISO 180/1U
Charpy Impact, notched, 23°C 7 kJ/m2 ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm NB kJ/m2 ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm NB kJ/m2 ISO 179/1eU
THERMAL Value Unit Standard
CTE, 23°C to 80°C, flow 7.5E-05 1/°C ISO 11359-2
CTE, 23°C to 80°C, xflow 8.E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate B/50 138 °C ISO 306
Vicat Softening Temp, Rate B/120 143 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 120 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 65 °C ISO 75/Ae
Relative Temp Index, Elec 105 °C UL 746B
Relative Temp Index, Mech w/impact 105 °C UL 746B
Relative Temp Index, Mech w/o impact 105 °C UL 746B
PHYSICAL Value Unit Standard
Mold Shrinkage on Tensile Bar, flow (2) (5) 1.2 - 1.7 % SABIC Method
Mold Shrinkage on Tensile Bar, xflow (2) (5) 1.2 - 1.7 % SABIC Method
Density 1.46 g/cm3 ISO 1183
Water Absorption, (23°C/sat) 0.9 % ISO 62
Moisture Absorption (23°C / 50% RH) 0.09 % ISO 62
Melt Volume Rate, MVR at 250°C/2.16 kg 5 cm3/10 min ISO 1133
ELECTRICAL Value Unit Standard
Volume Resistivity >1.E+15 Ohm-cm IEC 60093
Surface Resistivity, ROA >1.E+15 Ohm IEC 60093
Dielectric Strength, in oil, 1.6 mm 24.8 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 23 kV/mm IEC 60243-1
Relative Permittivity, 100 Hz 3.3 - IEC 60250
Relative Permittivity, 1 MHz 3.2 - IEC 60250
Dissipation Factor, 50/60 Hz 0.002 - IEC 60250
Dissipation Factor, 100 Hz 0.002 - IEC 60250
Dissipation Factor, 1 MHz 0.014 - IEC 60250
Relative Permittivity, 50/60 Hz 3.3 - IEC 60250
FLAME CHARACTERISTICS Value Unit Standard
UL Recognized, 94HB Flame Class Rating (3) 1.5 mm UL 94
UL Recognized, 94HB Flame Class Rating 2nd value (3) 3 mm UL 94
Glow Wire Flammability Index 650°C, passes at 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 22 % ISO 4589
Source GMD, last updated:2011/04/25
Processing

Parameter
Injection Molding Value Unit
Drying Temperature 110 - 120 °C
Drying Time 4 - 6 hrs
Maximum Moisture Content 0.02 %
Melt Temperature 260 - 285 °C
Nozzle Temperature 265 - 275 °C
Front - Zone 3 Temperature 260 - 280 °C
Middle - Zone 2 Temperature 255 - 280 °C
Rear - Zone 1 Temperature 240 - 260 °C
Hopper Temperature 40 - 60 °C
Mold Temperature 60 - 110 °C
Source GMD, last updated:2011/04/25

Compare Contact Us
VALOX? Resin
Grades Description
3007 LIMITED USE, No New Customers / Applications as of Jan. 2010 Unreinforced PBT. For flexible hinges. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
310SE0 Unreinforced, flame retardant PBT. V0-0.7mm. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
315 Unreinforced PBT. Compliant with food contact regulations acc to EC Reg. No. 10/2011. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data: Auto Specification
325 General purpose, unreinforced, medium flow PBT. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data: Auto Specification
325FC VALOX 325FC is compliant with food contact regulations. VALOX 325FC is a general purpose, unreinforced PBT injection moulding resin which contains internal mold release. This new 325FC grade is a good processable resin that exhibits faster and more e 
Datasheet 
Product Data: 
Auto Data:
3607U COMMERCIAL, VALOX 3607U is a UV-stabilized, flame retardant, injection moulding PBT resin, offering excellent weatherability resistance. Applications: powerplugs 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
4012G 10% glass fibre reinforced PBT with excellent mechanical properties. Applications: connectors. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
4022 20% GR. Improved mechanical performance versus VALOX 412. For spotlights, appliance housings and handles. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
4031 30% GR. Improved mechanical performance versus VALOX 420. For handles, spotlights, electric motors, etc. 
Datasheet 
Product Data: 
Auto Data:
420 30% glass reinforced PBT. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data: Auto Specification
420HP 30% Glass filled PBT resin, FDA Food Contact compliant in limited colors. 
Datasheet 
Product Data: 
Auto Data:
420SE0 30% GR, UL94V-0/5V rated. Numerous applications; edge trimmers, food mixer motor stator and commutator, cooling fan, connectors, bobbins, switches etc 
Datasheet 
Product Data: 
Auto Data:
430 33% GR PBT. Good impact, excellent stiffeness and strength. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data: Auto Specification
451E 20% glass reinforced, flame retardant PBT. V0-0.7mm.
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
4521 20 % Glass Reinforced flame retardant PBT. This material has a high flow and a high CTI. For electrical applications . 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
457 6.5% glass reinforced, flame retardant PBT. V0-0.7mm. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
4631 30% GF Flame retardant PBT with improved electrical properties 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
508 30% glass reinforced PBT. Low warpage characteristics. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data: Auto Specification
553 30% glass reinforced, flame retardant PBT. Low warpage characteristics. V0-0.8mm. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
735 40% glass/mineral reinforced PBT. Improved surface appearance. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data: Auto Specification
745 30% mineral reinforced polyester improved toughness and low warpage. Typical applications are telephone ringer frames and card racks. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
771 Mineral/glass reinforced flame retardant grade. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
815 15% glass reinforced PBT. Improved surface appearance. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
830 30% glass reinforced PBT. Improved surface appearance. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data: Auto Specification
855 15% glass reinforced, flame retardant PBT. Improved surface appearance. V0-1.6mm. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
865 30% glass reinforced, flame retardant PBT. Improved surface appearance. V0-1.6mm. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
DR48 17% glass reinforced, flame retardant PBT. V0-0.9mm.
Datasheet 
Product Data: Engineering Design Data 
Auto Data: Auto Specification
DR48 - CS1049 15% glass reinforced, flame retardant PBT. V0-0.9mm.
Datasheet 
Product Data: 
Auto Data:
DR51 15% glass reinforced PBT. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data: Auto Specification
ENH3500 PBT, Mold Release, Non-Brominated & Non-Chlorinated Flame Retardant, Heat Stabilized, 
Datasheet 
Product Data: 
Auto Data:
ENH4530 PBT, Glass, Mold Release, Non-Brominated & Non-Chlorinated Flame Retardant, Heat Stabilized, 
Datasheet 
Product Data: 
Auto Data:
ENH4550 PBT, Glass, Mold Release, Non-Brominated & Non-Chlorinated Flame Retardant, Heat Stabilized, 
Datasheet 
Product Data: 
Auto Data:
ENH4560 PBT, Glass, Mold Release, Non-Brominated & Non-Chlorinated Flame Retardant, Heat Stabilized, 
Datasheet 
Product Data: 
Auto Data:
ENH4565 PBT, PTFE, Glass, Mold Release, Non-Brominated & Non-Chlorinated Flame Retardant, Heat Stabilized, 
Datasheet 
Product Data: 
Auto Data:
HX312C Unreinforced PBT with release. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), food contact compliant. EtO and steam sterilizable. 
Datasheet 
Product Data: 
Auto Data:
HX420HP Medium Flow, 30% Glass filled, Polybutylene Terephthalate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), food contact compliant. Available in limited colors 
Datasheet 
Product Data: 
Auto Data:
K3501 Unfilled PBT, Mold Release, Heat Stabilized, Impact Modified, Opaque, A hydrollytically stable grade designed for challenging heat/humidity environments. 
Datasheet 
Product Data: 
Auto Data:
K4530 15% glass reinforced PBT, Hydrolytically stable, High flow, Automotive connectors. 
Datasheet 
Product Data: 
Auto Data:
K4560 30% glass reinforced PBT. Impact modified, high flow, hydrolytically stable. 
Datasheet 
Product Data: 
Auto Data:
SHF4910 PBT, Flame Retardant, Glass, 
Datasheet 
Product Data: 
Auto Data:
SHF4930 PBT, Super High Flow, Flame Retardant, High CTI, Glass, Mold Release, Heat Stabilized, 
Datasheet 
Product Data: 
Auto Data:
SHF4960 PBT, Super High Flow, Flame Retardant, Glass, High CTI, Mold Release, Heat Stabilized, 
Datasheet 
Product Data: 
Auto Data:
V2000DM PBT, Mold Release, 
Datasheet 
Product Data: 
Auto Data:
V3500EX Unfilled PBT,Flame Retardant, good flow, high elongation at break 
Datasheet 
Product Data: 
Auto Data:
V4860HR PBT, Flame Retardant, Glass, Flame retardant, Weatherable, 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
VX4920 20% Glass reinforced nucleated PBT/ASA with excellent mechanical properties high dimensional stability, and low density. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data: Auto Specification
VX4930 30% Glass reinforced nucleated PBT/ASA with excellent mechanical properties high dimensional stability, and low density. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
VX5011 10% glass reinforced PBT. Low warpage characteristics. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data: Auto Specification
VX5022 20% glass reinforced PBT. Low warpage characteristics. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data: Auto Specification

轉載請注明：轉載自環球塑化資訊網 http://pho2grapher.com/news/
本文鏈接：http://pho2grapher.com/index.php?homepage=&file=news&itemid=268539
免責聲明：本文"PBT Valox 745 SABIC Innovative Plastics"僅代表作者個人觀點，與環球塑化網無關。環球塑化網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡。電話：400-115-2868

機械手 激光機
©2025 環球塑化網 版權所有   技術支持： 環球塑化網     訪問量：582020  管理入口

收縮

  • 電話咨詢

  • 0769-82558310
QR code
關閉
關閉
請輸入驗證碼